the best jewelry wholesalers How to prevent gold -plated jewelry from returning color? 18K gold ...
5 thoughts on “the best jewelry wholesalers How to prevent gold -plated jewelry from returning color?”
Leave a Comment
You must be logged in to post a comment.
boba costume jewelry wholesale The general gold jewelry is that it does not change color when it is placed with foot gold and thousands of gold jewelry. If color changes, the first thing to consider is dirty and surface stained with dirt, just wash it to the jewelry shop.
18k gold jewelry will not change color. 18K gold is a 75%purity gold. It will only be worn for a long time, that is, after one or two years of continuous wear, there will be a dull color. Even 18K white gold jewelry will not be decolved, and the plating on the most surface is grinded off, revealing the pale yellow color, you can go to the jewelry shop electroplating.
The platinum jewelry does not wear color without wearing. The main reason is that we wear more scraping after wearing, so that the surface is lost, and you can go to the jewelry shop to polish to solve it.
The discoloration is gold and silver.发 发 钯 is easy to get black, even if it is not worn. Silver hair is easy to oxidize because silver is exposed to the air. You can use silver cloth to wipe it, or toothpaste to solve it, or wash it in the jewelry store. Delay, in addition, it is best to store silver jewelry, it is best to install it with a sealed bag.
If it is the jewelry of some alloy, it is non -precious metal jewelry, which is completely normal to change color and turn black. They are low value and it is better to buy new ones.
The IDO I used by myself, I think it is not bad.
wholesale gold personalized jewelry Careful care to avoid scraping.
Is to avoid bathing, dishes, or swimming: if you are not cleaned up, water and chemicals (such as shower gel, detergent, etc.) will be attached to the alloy surface, which becomes dull. You can wipe it with your baby's cool body powder and cotton cloth.
If the fingerprint or soiled the surface, you can use a soft but not containing fabric to dust on the alloy surface. During the dust removal, the strength should be lighter to avoid scratches on the surface.
It should be properly collected when you don't wear it. It is best to install it with jewelry boxes or closed pockets to prevent the metal surface from contacting the air and darkening the oxidation.
best wholesale jewelry suppliers in india It is best to remove it, just take it off, just wash it to the store, and the K gold jewelry contains a certain amount of silver and copper. The chemical activity of silver and copper is not as stable as gold. They have different degrees of chemical reactions under different conditions such as acid and alkali. In addition, do not wear jewelry in places with high content such as sulfur dioxide, hydrogen chloride, and hydrogen sulfide. Putting jewelry with severe chemical pollution: Avoid long -term contact between K gold jewelry with acidic, alkaline substances and sweat stains. Points with lead pollution (such as printing plants and other places) should also avoid wearing gold jewelry. Because of the capture effect of lead to gold (under high temperature). For a long time, lead particles can also be concentrated on the surface of the golden jewelry.
In short, after the golden jewelry is corroded by such chemicals, the surface will change color. In this case, you should use a toothbrush and a small amount of toothpaste to gently brush the K gold jewelry and rinse it with water. Or go to professional manufacturers and merchants polishing and cleaning.
diamond jewelry wholesale prices The best way is to not wear it, use a satin for dozens of floors, and then put it in a sealed box with desiccant, there is no problem. K gold will definitely fade, usually in 2 years, IP gold can be longer
latest fashion jewelry wholesale "Careful care to avoid scraping.
In avoiding jewelry during bathing, dishes or swimming: if you are not cleaned up, water and chemicals (such as bathing gel, detergent, etc.) will be attached to The surface of the alloy becomes dull. You can wipe the baby's cool body powder and cotton cloth.
Ifin the fingerprint or stain the surface, you can use a soft and soft fabric to dust on the surface of the alloy. Light, avoid surface dust scratching.
It should be properly collected when you don't wear it. It is best to install it with jewelry boxes or closed pockets to prevent the metal surface from contacting the air and darkening. "