denver sterling silver jewelry wholesale
5 thoughts on “denver sterling silver jewelry wholesale What is the reason for computer card?”
Leave a Comment
You must be logged in to post a comment.
Ready to get answers from a qualified injury lawyer?
Malesuada dignissim non, aliquam id tincidunt amet in sed et gravida pulvinar ipsum mauris etiam mattis nisl.
wholesale fashion jewelry com What is the computer card? No matter how good the configuration is, you may suddenly find that your computer is very stuck on one day -open a program? Wait for a long time; play a game? Can't play ... are you poisoning? Check it carefully, so why is it, please see my article, maybe a bit inspired by you.
. The load of the CPU is too large, or the work is abnormal. Check the CPU and graphics card heat dissipation, dust removal, oil, or replace the fan.
. The power supply voltage is unstable and the power supply is insufficient. Replace high -quality power supply.
3. Frequent cleaning disk and sorting disk fragments.
1. In the "My Computer" window, right -click to clean the disk formation — "Properties" - "Cleaning Disk" — Check the files to be deleted -OK -Yes.
2. Clear temporary files and start -run — enter "%temp%" - OK.
3. Use the optimization master or super rabbit to clean up the registry and junk files.
4. Turn off some startup programs and start-run-Msconfig --- Started, the general programs except the anti-virus software and input method can be turned off.
5, delete the procedure software that is not used.
6. Sorting disk fragmentation-start-all programs-attachment-system tools-disk fragmentation program-select disk-analysis-fragmentation.
7. Reduce the memory burden, and there should be too many procedures for opening. If there are too many documents that are opened at the same time or too many running programs, there is no enough memory to run other programs, and the procedures and windows that are not used at any time should be turned off at any time.
4. Upgrade graphics card and network card driver, change the graphics card with a higher grade.
5. Increase physical memory.
6. Reasonably set up virtual memory.
1. Playing games, virtual memory can be set larger, and the maximum and minimum values are set to 2-3 times the physical memory.
2, the method of virtual memory settings is: right-click my computer-attribute-high-level-performance settings-high-level-virtual memory change-Select the partition of virtual memory (page file) storage in the drive list- -C custom size-set value in "initial size" and "maximum values", then click the "Settings" button, and finally click the "OK" button to exit.
3, the partition stored in virtual memory (page file) must have enough space, insufficient hard disk resources, resulting in insufficient virtual memory. In a computer, it is enough to set up virtual memory in a partition. Set in multiple partitions.
7. Optimize the computer with optimization master or super rabbit.
This has been used, the computer is still very stuck, you have to check whether your hardware is problematic, or try to change a system JJ
Quick and more reliable 23 tricks, I hope to help you:
1) Install Ultra-133 hard disk accelerated expansion card or an ATA hard disk with 8M cache, which can effectively reduce the system Starting time.
2) The memory is increased to more than 512M.
3) Determine Windows XP uses the NTFS file system. Checking method: Double -click "My Computer", right -click the mouse on C: Disk, select "Properties", check the type of file system. If it is FAT32, turn it into NTFS, the method is to back up all important data, and then select the "run" in the "Start" menu, enter CMD and confirm. Under the prompt, enter Convert C: /FS: NTFS and Enter. In this process, it is best not to disconnect abnormally halfway and ensure that there are no viruses in the system.
4) Close the file index function. Windows index services should extract information from a large amount of files on the hard disk and create "keyword indexes". If there are thousands of files on the hard disk, this feature can speed up the speed of searching information from these files. But Windows creates this index, which takes a lot of time, and most people never use this feature. The way to turn off is: Double -click "My Computer", right -click the mouse on the hard disk and the sub -folder below, select "Properties", and cancel the "index to quickly find the file". If you have a warning or error message (such as "refusing to access"), click "Lost".
5) Upgrade the driver of the motherboard and graphics card and upgrade BIOS.
6) Clear Windows pre -reading folder every three months. Windows stores frequently used data in the pre -read folder. When you need to use these data again, you can greatly speed up the reading speed. But after a long time, there will be a large amount of junk data that is no longer used in this folder, but it increases the reading time of Windows and affects system performance.
7) Run the disk cleaning program once a month to delete temporary and useless files. Method: Double -click "My Computer", right -click the mouse on the disk, select "Properties", and click the "Disk Clean" button.
8) Double -click the IDE ATA/Atapi controller in the "Equipment Administrator", and set all the transition mode of all connected devices to DMA (if available) in Primary/Secondary Ide Channel.
9) Update the wiring. After using a new hard disk, it should be replaced with the 80-line Ultra-133 cable for all IDE devices. If only one hard disk is installed, the hard disk should be installed at the top of the cable. Do not install the interface in the middle of the cable, otherwise the signal abnormalities may occur. For the Ultra DMA hard disk drive, these abnormal signals will affect the driver's best performance.
10) Clear all Spyware (spy program). There are many free software, such as Adaware, you can complete this task. After the clearance, the software containing Spyware will not work normally. If one of the software is really needed, it will be installed again.
11) Delete unnecessary procedures from the startup group. Method: Select "Run" in the menu, enter "MSCONFIG", enter the "Start" tab, and cancel items that do not want to load when the system startup. For projects that cannot be determined, check the "Wintasks Process Library" (process library), which contains the description of known system processes, applications and SPYWARE. You can also find in Google et al. Find.
12) Enter the "Add/Delete Program" item in the control panel to delete unnecessary and unused programs.
13) Close all unnecessary animation and active desktop. Method: Click the "System" icon in the control panel, enter the "Advanced" tab, "Settings" for "Performance", and select the "Custom" single -selection box on the "Visual Effect" tab. The characteristic setting is a disabled state.
14) Use Tweak-XP software editing system registry to further improve performance.
15) Regular access to the Microsoft Windows Updated Site, downloading all update projects marked with the "Critical" logo.
16) Renewal anti -virus software every week. It is best to install only one set of anti -virus software in the system. Multiple sets of software will adversely affect performance.
17) The number of fonts installed should not exceed 500, and the number of fonts will slow down the system.
18) Do not confront the hard disk partition. The Windows XP's NTFS file system is more efficient to run on a relatively large partition. In the past, people did not need to format the entire hard disk when they facilitated data organizations or reinstalling the operating system. In the Windows XP's NTFS file system, re -installation of the operating system does not have to format the partition, and the data organization can be completed through a folder. For example, you don't need to put a large amount of data on the other D: disk, you can create a folder named "D drive". The data is placed in this folder Good organizational role.
19) Whether the memory bar (RAM) is intact. It is recommended to use the free program MEMTEST86. First, use this program to make a startup disk. After starting the computer with this disk, the program will run 10 different tests on the memory bar. Each test will be performed 3 times. If you encounter an error in the test, turn off your computer and unplug one of the memory (if there are many roots) and re -test. Still a bad memory bar, put on a good one.
20) If a CD or DVD recorder is installed on the computer, sometimes the upgrade driver can make the burning speed faster.
21) Cancel unnecessary services. Windows XP calls many users that may not be used at all. These services not only affect the operating speed, but also very unfavorable to the safety of the protection system. Therefore, unnecessary system services can be disabled as needed. Method: Select "Run" in the menu ", enter" services.msc "to open the" service management console ", and start or stop the service by changing the start -up type start -up type.
22) If you feel that Windows's single window browser is slow, you can improve it. The method is: open "My Computer", click "Tool"-> "Folder Options"-> "View ", Select" Open the folder window with an independent process ". This can prevent a slower device from affecting the response speed of the user interface.
23) Open the chassis, clean the dust and fragments, and do it at least once a year. At the same time, check whether all the fan is working normally, and whether the capacitors on the motherboard are swollen or leaked.
. At this point, 23 tricks have been used once, is it more satisfied with your own system?
Reminder: Although "fragmented" has a limited effect on improving computer performance, it A hard disk without fragments is always consuming less than a fragmented hard disk. Moreover, once the hard disk is damaged, if the data on the hard disk is stored continuously, it is easier to recover. , From a few months to a year), do "fragments" for hard disks.
wholesale designers jewelry Causes of slow running speed:
1, poisoning.
2, there are more garbage in the system, and it needs to be cleaned in time.
3. There are too many services.
4, many people connect your machine.
5. Open too much procedures at the same time.
...
The various reasons and solutions of the slow running speed of the computer
The should have encountered a large computer speed CPU usage Many people have also asked many such questions and posted many posts. Today, I agree to answer the introduction of one reason to cause this situation to write for the first time. As a result, the above situation
1. CPU temperature is too high, so it automatically adopts "frequency reduction" to protect yourself (CPU) touch the heat sink. If there is no abnormality in the self -examination process, we can basically exclude the problem of hardware. So what wrong with the setting parameters in the BIOS program? Let's enter the BIOS to see the "CPU Level 1 Cache" in the "BIOS Features Setup" item by "Disabled". CPU Level 1 Cache "is a parameter that plays a vital parameter for the performance of the CPU! Once it is closed, the CPU performance will immediately decrease by several levels. Adjusting it to" Enabled ", and then saving the settings, it will solve this problem. This problem will solve this problem. If you run the large software slowly, you can use a universal meter to test the voltage problem. If the small CPU will also automatically reduce the frequency, it will be used to change a power. Using frequent installations of various software, it will be
The slower and sluggish can be solved by cleaning up the registry to solve this problem. You can use tool software such as "Windows Optimization Master" to delete some software that are not commonly used to solve this The best way to problem is to reinstall Windows without having to format the system disk to use FAT32. It will greatly reduce the occupation space of the disk
3. The configuration problem is believed to see the words that lack sufficient memory. There will be a lot of friends who say this is possible, but how much memory is my machine. Let ’s take a look at an example of a PⅡ 266. The machine uses a popular AGP graphics card and installed 64MB SDRAM, so then How much is it really used? First of all, the Windows operating system will use about 6-10MB of memory to store its own modules; secondly, the second killer will count the AGP graphics bus. It is true that using AGP display The card bus can save a lot of expensive memory, but if the AGP function is activated on a computer equipped with 64MB memory, the system will be assigned to the main memory of the AGP graphics card as high as 32MB (uniformly controlled by the system), so , The system is only about 20MB of memory. Among them, 3 to 5MB should be left to prevent the system resources from exhausted and collapsed. Therefore Many background procedures are left, such as anti -virus software Realone Midea. Friends know that even the most commonly used Word software requires the best memory of about 16MB. When running large software such as 3D MAX, 64MB The memory is not enough. So at this time, the system will automatically use the hard disk space to virtual main memory, which is used to run program and storage switching files and various temporary files. Because the hard disk is a mechanical structure, the memory is an electronic structure. The two of them are both. The speed difference between the speed is several quantitative, so the use of hard disks to virtual main memory will cause the program to run speed greatly. You only need to buy two memory to get it
4.windows operating system brought by the operating system brought by the operating system One of the advantages is multi -linear and multi -tasks. The system can use the CPU to perform time -sharing operations so that you can do many things at the same time. But there are natural disadvantages of things, and multi -tasking operations will also propose higher your machine to your machine. Require. If you open too many applications at the same time, even if the memory is large, the main memory of the system will be rushed at this time, and the system resources will be exhausted, which will reduce the operating speed of the program and even cause the system to collapse. Taking the machine with 128MB main memory as an example, when about 50 programs at the same time, the system's resources in the help have been available for 0 available space. At this time, no operation is invalid unless it is turned off for some applications.因而如果要运行多任务,就得考虑机器档次够不够高,内存是否充裕,否则其运行速度会比蜗牛爬快不了多少rnrn5.硬件不支持原因有两个：一是The CPU horsepower is not strong enough. Although it is working hard to serve you, it is often not possible to blame the Intel update too fast? The second is that the component is too old. Take 3D games as an example. When running such games, the graphics card does not support the game mode (such as OpenGL, D3D) and has to use software simulation acceleration, resulting in a sudden drop in the game, making you feel depressed and swear no longer playing games.
6 [font = Arial] The most annoying reason for me has also been deeply harmed. Essence Essence Essence Essence Essence The virus seizures are infected with the virus in the computer, which slows down the operating speed of the computer. There are two mechanisms of function: First, after the virus invasion, first occupy the base of memory, and then use this as a base to start copying itself in the memory. As it gets larger and larger, it will quickly occupy the system and soon occupy the system. A large amount of memory leads to slowing down due to lack of main memory during normal procedures, or even not activated; second, because the virus program forces the CPU to execute useless junk procedures, making the system always busy , Resulting in slower computer speed. It is most important to update your own virus firewall network firewall to prevent others from organic! Intersection Intersection
The slow access speed
Slow speed is caused by multiple reasons. It is generally related to the advantages and disadvantages, operations, and settings of line equipment such as lines, equipment, environment and users, and microcomputer. But as long as we carefully observe and analyze the fault phenomenon and find out the reason for slow speeds, it is still easy to solve.
1. There are too many protocols bound to the network card. This situation is common among LAN users. If many protocols are bound to the network card, when the data is through the network card, the computer will spend a lot of time to determine which protocol the data is used to transmit. At this time, the user will feel slow. The solution is: only bind the PPPOE protocol with a network card to connect ADSL
The external connection to the Internet, and use another network card to bind other protocols of the local area network, so as to do its own job and improve performance. It will improve.
2.Adsl Equipment is poor when the heat dissipation of the heat dissipation. Many users put ADSL devices, routers, hubs, etc. in a cabinet, which is not conducive to heat dissipation and affects the normal work of ADSL. ADSL and other devices should not be placed in the cabinet. They should be placed separately. There is a ventilation and heat dissipation channel between the equipment. It is best to achieve constant temperature in the computer room. Generally, the ambient temperature should be controlled at 10-30 ° C.
3. Accompany the Internet interface error. This is caused by the Internet interface error specified by the Internet interface specified by the Windows system. ENTERNET
300 (virtual dial -up software) uses the local area network type virtual dial, while IE defaults to ordinary dial -up. When you browse, IE first find the dial -up interface. After you can't find the dial -up, you can find the proxy server in the local area network. Finally, you will find the Enternet
300 interface, so it will be very slow. You only need to re -run the Internet connection wizard, select the local area network method, and cancel the automatic search proxy server to solve it.
4. The TCP/IP protocol cannot be binding. The TCP/IP cannot be binding. Most of the network card drivers are not installed correctly, network card quality problems and PCI slots are poor. Delete the network card driver in the device manager first, and install the driver after restarting; if it is not good, change the network card to a PCI slot; it is not easy to change a network card.
5. The quality of the telephone line is inferior. ADSL technology has high requirements for the quality of the telephone line. The currently adopted ADSL is a RADSL (rate adaptive DSL). If the telecommunications bureau's telephone lines are disturbed by external factors for a certain period of time, RADSL will dynamically adjust the user's access speed according to the quality of the line quality and the distance between the transmission distance. If you visit foreign sites, the speed will be affected by factors such as export bandwidth and opponent's site lines and equipment configuration. The entire network needs to be coordinated and solved. The line problems mainly include hidden dangers left by the construction standards during construction. If the plastic sleeve is not added, the mouse bites the line; Condition damage, etc.
6. After the software has not been reset the user installed the ADSL, the Internet conditions have changed. The corresponding tool software has not been reset, which is one of the reasons for slow speed. If the communication software QQ, you need to set some settings. Select the "System Parameter" command from the QQ panel, click the "network settings" tag, and change the original "dial -up access to the Internet" to "LAN to Internet".
7. The hardware failure of the microcomputer hardware software problem is mainly manifested in the mesh card or the correct installation; the microcomputer motherboard and the network card are not compatible; the microcomputer configuration is low, especially the less memory causes the operation speed. The software failure is mainly because the user does not understand the computer knowledge. During the use of the operation, the operating system is wrong or the dial -up software is damaged and the Internet cannot access the Internet. After the user browses some web pages, there is a problem with the system. Delete; after the microcomputer reinstall the system, there is no dial -up software and so on. These software faults can be excluded as long as they are reinstalled.
8. A certain website cannot be opened for a long time. The reason is that at the peak of the Internet, many users access the same hot website. Because the server cannot handle it, or the bandwidth is narrow
, the network speed will be slow and the webpage cannot be opened for a long time. Avoid access to the Internet during peak hours or change to other sites.
9. Due to the fault of the Internet node, the network system automatically carries the route and generates slow network speed. Please wait patiently for the system to recover.
10. Due to the "cat "'s own quality problem, the Internet speed is slow. Please replace the high -quality "cat".
11. The electrical indicators of the telephone line are too low, and the Internet speed is slow. Please change the high -quality line.
12. The connection rate of "cat" and the host is low, and the Internet speed is slow. Please re -set the interface parameter settings.
13. Running a high -end operating system on a low -end machine, the speed of Internet access is slow. Please re -select the operating system and browser suitable for your computer.
14. Due to the improper setting of the browser, the Internet speed caused by the Internet, please reset the number of days of the webpage, set the cache directory of the browser on the hard disk with the highest transmission rate, and increase the capacity appropriately. rn目前大多数拨号上网用户的电脑都用Windows系统，很多时都听到用户抱怨上网速度慢，但我们发现有一种情况是：当认为慢的时候其实是已经断线了，不过此The icon of the Internet still exists, which causes the illusion that is still on the Internet. If you have a phone call around you, you can pick up the phone to identify, you can also pull the mouse to the icon on the Internet, right -click to select the "status" to observe whether there is any data. If there is no data for a period of time The identification line has been disconnected and can only be dial.
The current Internet speed generally declines, which is due to the current routing algorithm of online software. Most of the current network software's route selection algorithms are: constantly sending data packets to test the route speed. As soon as they find faster routing, they will immediately replace the current route. When there are few users, this algorithm can indeed improve efficiency; but the problem is that if many users are online at the same time, then the fast routing will soon be blocked; at this time, the software will change the route again, and again Card the blockage, change the route again ... Continuously vicious circulation, resulting in slower the speed of the entire Internet.
I answers: Leiss88 -Learning Magic Master 2nd Level 5-22 13: 00
The evaluation has been closed. n50% (0)
This related content
? Suddenly slowly opens on each page of the webpage
? I restore the opening speed of the web page after the computer and the picture cannot be ...
? Add u003Cscript language = "" src = "url"> u003C/scr ...
? What causes the opening speed of the webpage? No problem
In more related questions >>
Chat the same theme question: The web page opens the speed
The other answers a total of 6
Is it based on the book or desktop?
If according to what you said, if it is not poisonous, it may be network cable or network card.
I answers: -Levian Rookie 4 level 5-21 16: 13
is definitely a problem with the Internet, it has nothing to do with your computer
I think it should be like this. First of all, check whether it is poisoned. Second, check whether it is a rogue software to be blame. Third, check whether the memory of the machine is low. n -The first enters rivers and lakes 5-23 09: 35
Trojan horses virus, card bar is sometimes not easy to use these Trojan horses
It you can try McAfee (coffee)
The virus is a set of
answers: Medicine business-Assistant 23 09: 36
The key to see the network speed, the CPU speed of the current machine should be enough. The campus network of elephant university is not as good as broadband.
In see if there is a medium virus in the machine,
jewelry wholesale software At the end, I was late, the most solved method to solve the problem, adopt me!
The last, late answers, the best way to solve the problem, adopt me!
The last, late answers, the best way to solve the problem, adopt me!
Is as long as your hardware is not a problem, my 10 -year experience tells you that the problem of software can be followed by the following methods, which is successful!
1 You don't want to install the system, I want you to install the system:
and you must install: the pure version of the system, it is best to be an old system: for example, the "Shanghai Government Edition" installation version! To ensure that there is no virus, do not rely on anti -virus software, because antivirus software is the relationship between doctors and patients. Doctors may not be able to treat all your diseases
2 After installing the system, after the driver is installed, the process of viewing the process should be 19 to 22 processes, if it exceeds, the system has problems.
3 At this time, you can try whether your computer is still "sometimes when you turn on a program, IE, my computer or typing, it will not display immediately, it takes about 5-10 seconds to display. There is nothing to respond in the 5-10 seconds of stuck. "This situation.
4 If not, first backup the system, then install the software and other Dongdong, and then eliminate the problem.
frenzy wholesale jewelry 1: First upgrade the anti -virus software, Trojan horses to kill, cooperate with super rabbit or other cleaning tools, restart, press F8 to enter the security mode, first use the anti -virus software and Trojan to kill the whole case.
2: Clean up the disk: Open my computer -right -click Local Disk C -Properties -Disk Cleanings -Check the options with data on the page, such as "Recycling Station", "Old Data", "Internet temporary file" Essence Essence --- Determine --- Yes.
The click "Disk Cleaning" -the other options -"Clean" in the "System Restore" box -click "Yes" -click "OK" -click "Yes".
3: Use super rabbit (recommendation), clean up the system, clean the Internet traces, clean up the registry, etc.
4: Set the virtual memory: Right-click my computer ---- Properties ---- Advanced ---- Performance box, click 'card --- click' Advanced '--- click' Virtual memory 'Fragment Listen' Change '---- Select the "Custom size'.
The maximum value is 1.5 ~~ twice the initial value.
Ol maximum value to determine? Open the task manager ---- click ‘performance’. Look at the "peak" in the "recognition" box at the bottom left. The calculation unit in the task manager is K. 1024K = 1MB. It is the maximum value to calculate it into an MB unit. (Open a few more times and see the highest value of several times). For example, my peak is 650328K. Then the maximum value of my computer is 650328k /1024 = 636MBM, then the initial value is 318MB. After filling in the change, click to change
5: Reduce the system reduction occupation of the disk space: right -click my computer -attribute -system restore -select C -click "Settings" -mine to the left to the left to the left to the left to the left to the left to the left to the left to the left to the left to the left to the left to the left to the left to the left The smallest, or simply close. --- Application -OK.
6: Delete unnecessary files: Open my computer -tools -folder options -View -display all files and folders -application -OK.
In open my computer -Local Disk C -Open Windows -Delete All $ .... $ files (patch), delete files that can be deleted under the help folder, delete the IMJP6_1 and IMKR8_1 two two two The files that can be deleted under the folder (one is Japanese and the other is Korean).
jewelry making pendants wholesale This is because you have to have a lot of junk files. Because the computer will automatically prosecute the C drive. So it will be slow. Also, it is often surfing the Internet. Will be under C: Documeents and Settings Local Settings. There are many records under TEMPORARY Internet Files. These Dongdong is not used. So you can delete this file and delete things. TEMP can be deleted in the file after installing the software. Under the History, you are open every day. That is "log". This is also deleted below. This can soon be a little bit. Try it